RFFM-1730
高显色白光+808nm 荧光成像，结构紧凑，散热良好，性能可靠
内窥镜白光照明，ICG-NIR 荧光成像
光学参数 (Optical data) | 典型值 (Typical Value) | 备注 (Remarks) |
光源 (Light source) | White LED + 808 nm laser | |
激光峰值波长(Peak wave length of laser) | 808 nm | 半峰宽 3 nm (FWHM=3 nm) |
色温 (CCT) | 5500±500K | 白光 (White LED after 1m, NA0.62,Φ5mm fiber) |
显色指数 (CRI) | Ra≥90 | 白光 (White LED after 1m, NA0.62,Φ5mm fiber) |
白光输出光通量 | 2400 lm | 模组输出，焦平面光斑大小4.5X5.5mm |
2100 lm | 配我司转接头,进入NA=0.62,Φ5mm导光束的能量 | |
808 nm激光输出能量 | 5700mW | 模组输出,进入NA=0.62,Φ5mm导光束的能量 |
5300mW | 配我司转接头,进入NA=0.62,Φ5mm导光束的能量 | |
后焦距 (Back focal length) | 23.6 mm | 自最后一枚透镜的顶点 (From the last lens vertex) |
电气参数 (Electrical data) | ||
输入电压 (Input voltage) | DC 12V | 可根据客户需求定制 (To be customized) |
功率 (Power consumption) | 155 W | 包含驱动板的功耗 (Driver board consumption included) |
启动功率 (Initial power) | 200 W | 最低电源输出功率 (Minimum power output) |
调光模式 (Dimming mode) | RS232 | 5%~100% |
白光焦平面的照度分布：
Illuminance distribution on the focal plane for white light
|
光学参数 (Optical data) | 典型值 (Typical Value) | 备注 (Remarks) |
光源 (Light source) | White LED + 808 nm laser | |
激光峰值波长(Peak wave length of laser) | 808 nm | 半峰宽 3 nm (FWHM=3 nm) |
色温 (CCT) | 5500±500K | 白光 (White LED after 1m, NA0.62,Φ5mm fiber) |
显色指数 (CRI) | Ra≥90 | 白光 (White LED after 1m, NA0.62,Φ5mm fiber) |
白光输出光通量 | 2400 lm | 模组输出，焦平面光斑大小4.5X5.5mm |
2100 lm | 配我司转接头,进入NA=0.62,Φ5mm导光束的能量 | |
808 nm激光输出能量 | 5700mW | 模组输出,进入NA=0.62,Φ5mm导光束的能量 |
5300mW | 配我司转接头,进入NA=0.62,Φ5mm导光束的能量 | |
后焦距 (Back focal length) | 23.6 mm | 自最后一枚透镜的顶点 (From the last lens vertex) |
电气参数 (Electrical data) | ||
输入电压 (Input voltage) | DC 12V | 可根据客户需求定制 (To be customized) |
功率 (Power consumption) | 155 W | 包含驱动板的功耗 (Driver board consumption included) |
启动功率 (Initial power) | 200 W | 最低电源输出功率 (Minimum power output) |
调光模式 (Dimming mode) | RS232 | 5%~100% |
白光焦平面的照度分布：
Illuminance distribution on the focal plane for white light
|
